8t Spout Electric Arc Furnace If Electric Furnace, Main Frequency Electric Furnace, Steel Furnace, Aluminum Furnace; Smelting Equipment If Aluminum Furnace

Chine
8t Spout Electric Arc Furnace If Electric Furnace, Main Frequency Electric Furnace, Steel Furnace, Aluminum Furnace; Smelting Equipment If Aluminum Furnace
fabrication et fournisseur

8t Spout Electric Arc Furnace If Electric Furnace, Main Frequency Electric Furnace, Steel Furnace, Aluminum Furnace; Smelting Equipment If Aluminum Furnace image

Get Latest Price Request a quote

Info de Base.

N° de Modèle.

personnalisé

état

nouveau

source d′alimentation

électrique

nivellement automatique

automatique

service après-vente

en ligne

garantie

1 an

capacité

diamètre de la coque

3200 mm

Paquet de Transport

Nude, Wooden Case

Spécifications

To be checked

Marque Déposée

VILLE

Origine

Chine

Code SH

8514300020

Capacité de Production

100 Sets Per Year

Description de Produit

IF Aluminum Furnace
Smelting Equipment (include IF electric furnace, main frequency electric furnace, steel furnace, aluminum furnace, etc)
This series products use the 200-2500Hz IF power supply for induction heating, 30-8000KW, mainly used in the smelting and temperature raise of smelting steel, alloy steel, stainless steel, special steel, can also be used for copper, aluminum, and other non-ferrous metals.
Characteristics:
1, small size, light weight, high efficiency, low power consumption;
2, a low temperature around the stove, smoke less, a good operating environment;
3, simple operation process, reliable operation;
4, uniform heating temperature, small burning injury, uniform metal components, quality casting;
5, warming fast, easy temperature control, high production efficiency.
The start-up mode takes the intelligent digital control system mode, which is a successful change toward the development of intelligent control after the impact start-up mode and zero-pressure clutter start-up mode. As for the resistance change and deviate from the rated impedance and lower the efficiency of the power supply factors, it added the regulator and the regulator inverter in the control circuit impedance, so as to enhance the power efficiency and reduce the heating time, more energy-saving.
GPS series high-frequency power supply can be reached 10KHZ, widely used in many traditional high-frequency heating areas.
With advanced computer intelligent computer control principle, leading domestic technology, unique integrated control system, it’s easier to maintain. The relays control system reduces the risk failure, and a number of advanced technology improves the efficiency of electric heating and more power-saving.

Main technical parameters

SN	Description	Unit	Data
1	Rated capacity	T	8t
2	Average tapping	T	10t
3	Diameter of shell	mm	Φ3200
4	Electrode pitch circle diameter	mm	Φ800
5	Electrode diameter	mm	Φ300
6	Electrode travel stroke	mm	1600
7	Electrode lifting speed(up/down)	m/min	6/4
8	Max. steel tapping angle (forward)		42°
9	Max. slag tapping angle (backward)		12°
10	Max. roof swivel angle		85°
11	Roof lifting stroke	mm	400
12	Transformer capacity with water/oil cooler	kVA	5000
13	Transformer primary voltage	kV	10
14	Transformer tap (on-load tap changer)	step	5
15	Electrode lifting mode		VVVF driving
16	Cooling water circulating flow	T/h	180

Scope of Supply

SN	Item	Qty	Remark
1	Furnace body	1 set
2	Tilting mechanism	1 set
3	Water-cooled roof	1 set
4	Roof lifting & swivel mechanism	1 set
5	Conductive arms	1 set
6	Electrode lifting mechanism (VVVF driving)	1 set
7	Cooling water distributor	1 set
8	Hydraulic power pack	1 set	Proportional valve & pump make: Parker
9	Short net	1 set
10	L.V. Control system	1 set
11	PLC control system & HMI	1 set	Siemens S7-300
12	5MVA Furnace transformer c/w hydro-oil cooler	1 set
13	Compressed air device	1 set
14	10kV H.V. switchboard	1 set	GG-1A type panel
	FOB china port price

Supplied by the Buyer:

1) Installation and installation material, furnace refractory lining, hydraulic medium, lubrication medium and cleaning
medium, graphite electrodes;

2) Civil works and design (Seller provides furnace foundation drawings and civil work requirements), embedded
furnace foundation parts;

3) Water supply and gas supply main inlet are laid to Seller’s equipment connection point, H.V. incoming line is
connected to seller’s H.V. switchboard and Transformer terminals, L.V. supply lines are connect to Seller’s L.V.
power distribution panel.

Delivery: 4 month after date receiving down payment.

Sales team:

Our Best Service For You

1.	Pre sale service
a.	make technical solution
b.	send quotation, technical data sheet and drawing
c.	prepare power transmission plan, testing plan and shipment plan
2.	In sale service
a.	supervise the manufacturing schedule totally in accordance with the plan
b.	send photos to customer during every manufacturing process(hold point)
c.	inform the customer one week before testing.
3.	After sale service
a.	installation and commissioning, training the workers
b.	quick response within 12 hours any time
c.	provide 12 months guarantee period normally.

/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(« , »).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Qui nous sommes Chine 8t Spout Electric Arc Furnace If Electric Furnace, Main Frequency Electric Furnace, Steel Furnace, Aluminum Furnace; Smelting Equipment If Aluminum Furnace fabrication et fournisseur,Vous pouvez obtenir plus de détails par e-mail, vous obtiendrez un prix bon marché ou un prix usine.

Get Latest Price Request a quote